TPS2540ARTER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2540 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 185μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 73m Ω |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2540ARTER Overview
Tape & Reel (TR) is the way it's packaged.The 16-WFQFN Exposed Pad package contains it.The lighting driver has the mounting type Surface Mount.It owns USB Switch switch type.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.By default, it is set to output 1.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts.A lighting driver with Status Flag features is available.This object belongs to the TPS2540 family.It consists of 16 terminations in total.It is necessary to use the 16 pins in order to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.This operation requires the maximum output current to be decreased to 2.5A.It is possible to achieve a high level of efficiency with a supply voltage of 5V.This lighting driver is mounted in the way of Surface Mount.It is equipped with a total of 16 pins.The LED driver is packaged in an econtainer with a capacity of Power Management Circuits.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 4.5V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 available channels.This part's power supply is 5V.
TPS2540ARTER Features
Supplied from 5V
1 channels
TPS2540ARTER Applications
There are a lot of Texas Instruments TPS2540ARTER Power Switches ICs applications.
- Hot-Swap Systems
- Wireless Modem Data Cards
- Wireless/Networking Cards
- Set-top-box
- Storage (HDDs, SSDs)
- Notebook and Tablet Computers
- Smart Phones, Feature Phones
- Smartphone and PDA
- Wireless Headsets
- Telecom and Network Systems
