TPS2540ARTET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2540 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 2.5A |
| Nominal Supply Current | 185μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 73m Ω |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2540ARTET Overview
It is packaged in the form of a Cut Tape (CT).There is a package for it in the 16-WFQFN Exposed Pad package.The mounting type of the LED driver is Surface Mount.It owns USB Switch switch type.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.As a default, the output is set to 1.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.The lighting driver has Status Flag features.This object belongs to the TPS2540 family.As a result, there are 16 terminations.16 pins are used for operation.As far as the lighting driver is concerned, there are 1 functions.The maximum output of the LED driving board is 2.5AV.It is possible to obtain high efficiency with a supply voltage of 5V.Surface Mount is mounted in the way of this lighting driver.A total of 16 pins are included in this LED driver.The LED driver is packaged in an econtainer with a capacity of Power Management Circuits.The maximum supply voltage for this LED driver is 5.5V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 4.5V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 1 channels available.This part has a power supply of 5V volts.
TPS2540ARTET Features
Supplied from 5V
1 channels
TPS2540ARTET Applications
There are a lot of Texas Instruments TPS2540ARTET Power Switches ICs applications.
- Portable Devices
- Storage (HDDs, SSDs)
- USB Power Distribution
- USB Protection
- Wireless Headsets
- Set-Top Boxes
- Portable GPS
- PC Cards
- Portable Video Game Players
- Hot-Swap Systems
