TPS2540RTET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 73mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2540 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 2.5A |
| Nominal Supply Current | 30mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 73m Ω |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2540RTET Overview
The package is in the form of a Tape & Reel (TR).The 16-WFQFN Exposed Pad package includes it.Surface Mount is the mounting type of the LED driver.A USB Switch switch type is owned by it.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.The LED driver is equipped with 1 outputs.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It is equipped with Status Flag features.It is part of the TPS2540 family of LED drivers.In total, there are 16 terminations.The 16 pins are used for the operation of the system.As far as functions are concerned, the lighting driver has 1.The lighting driver's maximum output is 2.5AV.As long as the supply voltage is 5V, high efficiency can be achieved.Surface Mount is mounted in the way of this LED driving board.A total of 16 pins are present on it.In this LED driving board, there is 73mOhm resistance.Self-contained LED driver with Power Management Circuits capacity in an econtainer.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.In total, 1 channels are available.A 5V power supply is used by the part.There is a maximum input voltage of 5.5V volts.As far as input voltage goes, it has a minimum of 4.5V volts.
TPS2540RTET Features
Supplied from 5V
Resistance of 73mOhm
1 channels
TPS2540RTET Applications
There are a lot of Texas Instruments TPS2540RTET Power Switches ICs applications.
- Wireless Modem Data Cards
- Smart Phones, Feature Phones
- PDAs
- Hot Swap
- Wireless/Networking Cards
- Portable/Handheld Devices
- Smartphone and PDA
- Wireless Headsets
- Solid State Drivers
- Hot-Swap Systems
