TPS2541ARTER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2541 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 185μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 73m Ω |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2541ARTER Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This package is included in 16-WFQFN Exposed Pad.This lighting drivere has a mounting type of Surface Mount.There is a switch type of USB Switch.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The LED driver is equipped with 1 outputs.Operation is based on a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.As far as features are concerned, the LED driving board has Load Discharge, Status Flag.There is a TPS2541 family of things that it belongs to.A total of 16 terminations can be found in it.In order to operate, 16 pins are used.Currently, the lighting driver has a total of 1 functions.Maximum output current falls to 2.5A when operation criteria are met.It is possible to obtain high efficiency with a supply voltage of 5V.This lighting driver is mounted in the way of Surface Mount.The LED driver has a total of 16 pins.A self-contained container with a capacity of Power Management Circuits contains this lighting driver.The Vsup value (maximum supply voltage) is set to 5.5V.For normal operation, the supply voltage (Vsup) must be kept above 4.5V.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.We currently have 1 channels available.This part's power supply is 5V.
TPS2541ARTER Features
Supplied from 5V
1 channels
TPS2541ARTER Applications
There are a lot of Texas Instruments TPS2541ARTER Power Switches ICs applications.
- USB Power Distribution
- Low Voltage I/O System Power
- Portable Video Game Players
- PC Cards
- PDAs
- Solid State Drivers
- PC Card Hot Swap
- Telecom and Network Systems
- HDD and SSD
- Wearable Devices
