TPS2541ARTET
| Parameters | |
|---|---|
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 2.5A |
| Nominal Supply Current | 185μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 73m Ω |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2541 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
TPS2541ARTET Overview
It is package in Tape & Reel (TR) case.It's included in the 16-WFQFN Exposed Pad package.This LED driving board is mounted using the mounting type Surface Mount.It owns the USB Switch switch type.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.The LED driver has a total of 1 outputs.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.Load Discharge, Status Flag features are available on the lighting driver.The TPS2541 family contains this object.A total of 16 terminations can be found in it.The 16 pins are used for the operation of the system.As far as the lighting driver is concerned, there are 1 functions.The LED driver output is limited to 2.5AV.As long as the supply voltage is 5V, high efficiency can be achieved.In this case, it is mounted in the way of Surface Mount.16 pins are equipped with it.The LED driver is self-contained in an econtainer with Power Management Circuits capacity.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 4.5V.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels to choose from.This part is powered by 5V.
TPS2541ARTET Features
Supplied from 5V
1 channels
TPS2541ARTET Applications
There are a lot of Texas Instruments TPS2541ARTET Power Switches ICs applications.
- Solid State Drivers
- Portable Music Players
- USB Power Distribution
- Storage Drives
- USB3.1 Power Delivery
- PDAs
- Portable/Handheld Devices
- Hot Swap
- Wearable Devices
- Solid-State Drives
