TPS2543QRTERQ1
| Parameters | |
|---|---|
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2543 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Element Configuration | Single |
| Nominal Supply Current | 205μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ms |
| Switch Type | USB Switch |
| Bandwidth | 2.6 GHz |
| Supply Current-Max (Isup) | 0.26mA |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 73m Ω |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | NRND (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
TPS2543QRTERQ1 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).In the 16-WFQFN Exposed Pad package, it is included.The lighting driver has the mounting type Surface Mount.USB Switch is the switch type that it owns.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.The lighting driver is equipped with 1 outputs that can be used.To operate, it needs a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.It comes under the family of TPS2543.A total of 16 terminations have been recorded.The 16 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.This results in the maximum output current dropping to 3A to meet the operation criteria.Supply voltages of 5V allow for high efficiency.As a result, it is mounted in the manner of Surface Mount.It has a resistance of 120mOhm.It is included in the Automotive, AEC-Q100 series.The LED driver is self-contained in an econtainer with Power Management Circuits capacity.The maximum supply voltage for this LED driver is 5.5V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 4.5V.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.The power supply of the part is 5V.In order to operate, it requires at most 0.26mA amps of supply current.
TPS2543QRTERQ1 Features
Supplied from 5V
Resistance of 120mOhm
1 channels
TPS2543QRTERQ1 Applications
There are a lot of Texas Instruments TPS2543QRTERQ1 Power Switches ICs applications.
- Mobile Communication Devices
- Storage (HDDs, SSDs)
- Notebook and Tablet Computers
- Solid State Drivers
- PDAs
- Portable GPS
- PC Cards
- Hard Disk Drives
- Hot-Swap Systems
- Solid-State Drives
