TPS2543QRTETQ1
| Parameters | |
|---|---|
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | NRND (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2543 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Element Configuration | Single |
| Nominal Supply Current | 205μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ms |
| Switch Type | USB Switch |
| Bandwidth | 2.6 GHz |
| Supply Current-Max (Isup) | 0.26mA |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 73m Ω |
TPS2543QRTETQ1 Overview
A Tape & Reel (TR) is used to package it.This package is included in 16-WFQFN Exposed Pad.In this case, the LED driving board is mounted as Surface Mount.A USB Switch switch type is owned by it.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The LED driver has a total of 1 outputs.With a supply voltage of Not Required, the LED driving board operates.A maximum voltage of N-Channel volts is available from the output of this LED driver.The TPS2543 family consists of this type.It contains 16 terminations.For operation, we use the 16 pins.There are 1 functions of the LED driver.The maximum output current is reduced to 3A to meet the operation criteria.A supply voltage of 5V leads to high efficiency.The lighting driver is mounted in the direction of Surface Mount.It has 120mOhm resistance.This electrical component is part of the Automotive, AEC-Q100 series.This LED driver is self-contained in an econtainer with a capacity of Power Management Circuits.The Vsup value (maximum supply voltage) is set to 5.5V.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 4.5V.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.There are a total of 1 channels available.This part has a power supply of 5V.0.26mA is the maximum operating current.
TPS2543QRTETQ1 Features
Supplied from 5V
Resistance of 120mOhm
1 channels
TPS2543QRTETQ1 Applications
There are a lot of Texas Instruments TPS2543QRTETQ1 Power Switches ICs applications.
- Wearable Devices
- USB Ports/Hubs
- Various applications equipped with buttons
- Wireless Modem Data Cards
- Storage (HDDs, SSDs)
- Portable GPS
- Smart Phones, Feature Phones
- Hot Swaps
- Wireless/Networking Cards
- USB Power Distribution
