TPS2543RTER
| Parameters | |
|---|---|
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 73m Ω |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2543 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 205μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.7 ms |
| Switch Type | USB Switch |
| Bandwidth | 2.6 GHz |
| Supply Current-Max (Isup) | 0.26mA |
| Turn-Off Delay Time | 1.7 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
TPS2543RTER Overview
The LED driver's packaged as a Tape & Reel (TR).It is included in the package 16-WFQFN Exposed Pad.A Surface Mount mounting is used for the LED driving board.It owns the USB Switch switch type.To ensure reliable operation, set the temperature to -40°C~125°C TJ.The lighting driver is equipped with 1 outputs that can be used.The LED driving board is powered by a voltage of Not Required.It has a maximum output voltage of N-Channel volts.It comes under the family of TPS2543.A total of 16 terminations can be found in it.The 16 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.The maximum output current drops to 3A in order to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 5V.This lighting driver is mounted in the way of Surface Mount.It has a resistance of 120mOhm.Self-contained LED driver with Power Management Circuits capacity in an econtainer.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 4.5V.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.We currently have 1 channels available.There is a voltage supply of 5V volts on this part.It operates at a maximum supply current of 0.26mA.
TPS2543RTER Features
Supplied from 5V
Resistance of 120mOhm
1 channels
TPS2543RTER Applications
There are a lot of Texas Instruments TPS2543RTER Power Switches ICs applications.
- Gaming
- Portable Video Game Players
- Portable/Handheld Devices
- Wireless/Networking Cards
- Storage Drives
- PDAs
- USB3.1 Power Delivery
- USB Ports/Hubs
- Portable GPS
- Hot Swap
