TPS2543RTET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2543 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 3A |
| Output Configuration | High Side |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Supply Current-Max (Isup) | 0.26mA |
| Nominal Input Voltage | 5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| ESD Protection | Yes |
| Rds On (Typ) | 73m Ω |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2543RTET Overview
As a result, it is packaged in the form of a Tape & Reel (TR).Package 16-WFQFN Exposed Pad contains it.The lighting driver has the mounting type Surface Mount.This switch is of type USB Switch.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.By default, it is set to output 1.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It is a member of the TPS2543 family.In total, there are 16 terminations.The 16 pins are used to operate the LED driver.There are 1 functions of the LED driver.The lighting driver's maximum output is 3AV.The supply voltage of 5V is conducive to high efficiency.Surface Mount is mounted in the way of this lighting driver.120mOhm resistance is present in the lighting driver.It is set to 2.5A in this case.A container with a capacity of Power Management Circuits contains this self-contained lighting driver.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.In total, 1 channels are available.5V is the power supply of the part.It has a maximum supply current of 0.26mA.
TPS2543RTET Features
Supplied from 5V
Resistance of 120mOhm
1 channels
TPS2543RTET Applications
There are a lot of Texas Instruments TPS2543RTET Power Switches ICs applications.
- Hot Swap
- Various applications equipped with buttons
- Hot Swap
- Set-top-box
- Portable/Handheld Devices
- Hot-Swap Systems
- Portable Music Players
- PC Card Hot Swap
- Wireless Headsets
- Hard Disk Drives
