TPS2544RTER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2544 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Supply Current-Max (Isup) | 0.27mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 73m Ω |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2544RTER Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included in the package 16-WFQFN Exposed Pad.A Surface Mount mounting is used for the LED driving board.It owns USB Switch switch type.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.The TPS2544 family contains this object.It contains 16 terminations.The 16 pins are used to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.As a result, the maximum output current is reduced to 3A in order to meet the operation requirements.With a supply voltage of 5V, high efficiency is possible.Surface Mount is mounted in the way of this LED driving board.It has 120mOhm resistance.This case results in a 2.5A output current.A self-contained container with a capacity of Power Management Circuits contains this lighting driver.A maximum supply voltage of 5.5V is set in Vsup.For normal operation, the supply voltage (Vsup) must be kept above 4.5V.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.We offer 1 channels in total.In this part, the power supply is set to 5V.It operates at a maximum supply current of 0.27mA.
TPS2544RTER Features
Supplied from 5V
Resistance of 120mOhm
1 channels
TPS2544RTER Applications
There are a lot of Texas Instruments TPS2544RTER Power Switches ICs applications.
- Hard Disk Drives
- Hot-Swap Systems
- Low Voltage I/O System Power
- Gaming
- Storage (HDDs, SSDs)
- Solid-State Drives
- USB Protection
- Portable GPS
- Telecom and Network Systems
- Set-Top Boxes
