TPS2544RTET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2544 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ms |
| Max Output Voltage | 2.84V |
| Switch Type | USB Switch |
| Supply Current-Max (Isup) | 0.27mA |
| Turn-Off Delay Time | 3 ms |
| Min Output Voltage | 2.57V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 73m Ω |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2544RTET Overview
Tape & Reel (TR) is how it's packaged.It's included in the 16-WFQFN Exposed Pad package.This LED driving board is mounted using the mounting type Surface Mount.The switch type is USB Switch.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.There are 1 outputs available on this lighting driver.A voltage of Not Required is used to power it.The maximum output voltage is N-Channel volts.It belongs to the family TPS2544.A total of 16 terminations have been recorded.The operation is carried out using the 16 pins.The LED driving board has a total of 1 functions.This results in the maximum output current dropping to 3A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 5V.The LED driving board is mounted in the way of Surface Mount.There is 120mOhm resistance on the LED driver.When this is the case, the output current is set to 2.5A.The LED driver is self-contained in an econtainer with Power Management Circuits capacity.In this case, Vsup (maximum supply voltage) is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must remain above 4.5V.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.You can select from 1 channels.The power supply of the part is 5V.For operation, it can supply a maximum current of 0.27mA.
TPS2544RTET Features
Supplied from 5V
Resistance of 120mOhm
1 channels
TPS2544RTET Applications
There are a lot of Texas Instruments TPS2544RTET Power Switches ICs applications.
- Portable Video Game Players
- PC Card Hot Swap
- Hot Swap
- USB Ports/Hubs
- Storage (HDDs, SSDs)
- Gaming
- Hot-Swap Systems
- Smartphone and PDA
- Handheld Devices
- PDAs
