TPS2546QRTERQ1
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Load Discharge |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 173mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO REQUIRES INPUT VOLTAGE 0 TO 5.5V |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2546 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | N-Channel |
| Max Output Current | 2.5A |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 100mA |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ms |
| Switch Type | USB Switch |
| Supply Current-Max (Isup) | 0.27mA |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 73m Ω |
| Max Junction Temperature (Tj) | 125°C |
| On-State Resistance | 173mOhm |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2546QRTERQ1 Overview
It is package in Tape & Reel (TR) case.It is included with the 16-WFQFN Exposed Pad package as well.This lighting drivere has a mounting type of Surface Mount.There is a USB Switch switch type associated with it.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The LED driver has a total of 1 outputs.There is a maximum output voltage of N-Channel volts on this LED driver.The lighting driver has Load Discharge features.It belongs to the TPS2546 family.It contains 16 terminations.It is necessary to use the 16 pins in order to operate the LED driver.It contains 1 functions.To comply with the operation criteria, the maximum output current is reduced to 2.5A.High efficiency is possible when the supply voltage is set to 5V.Surface Mount is mounted in the way of this LED driving board.It has a resistance of 173mOhm.A component of this type is included in the Automotive, AEC-Q100 series.This case has the output current set to 100mA.A self-contained container with a capacity of Power Management Circuits contains this lighting driver.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.A total of 1 channels are available for you to choose from.In this part, the power supply is set to 5V.In addition, ALSO REQUIRES INPUT VOLTAGE 0 TO 5.5V can be produced using this LED driving board.As a result, it is only capable of handling voltages up to 5.5VV.Supply voltages as low as 4.5VV are possible.For operation, it can supply a maximum current of 0.27mA.
TPS2546QRTERQ1 Features
Supplied from 5V
Resistance of 173mOhm
1 channels
Additional features like ALSO REQUIRES INPUT VOLTAGE 0 TO 5.5V
TPS2546QRTERQ1 Applications
There are a lot of Texas Instruments TPS2546QRTERQ1 Power Switches ICs applications.
- PDAs
- USB Power Distribution
- Portable Video Game Players
- Hot Swaps
- Wireless Modem Data Cards
- Hot Swap
- Wearable Devices
- Solid State Drivers
- Storage (HDDs, SSDs)
- HDD, SSD
