TPS2550DRVR
| Parameters | |
|---|---|
| Weight | 9.695537mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2550 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1.1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 6.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 100m Ω |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Number of Pins | 6 |
TPS2550DRVR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This package is included in 6-WDFN Exposed Pad.This lighting drivere has a mounting type of Surface Mount.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The lighting driver has a total of 1 outputs that are available for use.It uses a supply voltage of Not Required to operate.The maximum output voltage of this LED driver is N-Channel volts.Features of the lighting driver are Slew Rate Controlled.I believe it belongs to the TPS2550 family.A total of 6 terminations have been recorded.The 6 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.There is a maximum output of 1.1AV from the LED driver.The supply voltage of 3.3V is conducive to high efficiency.The lighting driver is mounted in the direction of Surface Mount.A total of 6 pins are included in this LED driver.Normal operation requires Vsup above 2.5V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.
TPS2550DRVR Features
Supplied from 3.3V
1 channels
TPS2550DRVR Applications
There are a lot of Texas Instruments TPS2550DRVR Power Switches ICs applications.
- Hot Swap
- PC Card Hot Swap
- Portable/Handheld Devices
- Gaming
- PDAs
- Portable GPS Device
- Set-top-box
- Low Voltage I/O System Power
- Hot-Swap Systems
- Set-Top Boxes
