TPS2550DRVT
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 9.695537mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 715mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2550 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1.1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 6.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 100m Ω |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2550DRVT Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package 6-WDFN Exposed Pad.The mounting type of the LED driver is Surface Mount.There is a General Purpose switch type associated with it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.As a default, the output is set to 1.Operation is based on a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.The lighting driver has Slew Rate Controlled features.It belongs to the TPS2550 family.There are 6 terminations in it.In order to operate, 6 pins are used.Currently, the lighting driver has a total of 1 functions.The lighting driver's maximum output is 1.1AV.High efficiency is possible at 3.3V supply voltage.Surface Mount is mounted in the way of this LED driving board.As a result, it has a total of 6 pins.100mOhm is the resistance of the lighting driver.In order to operate normally, the supply voltage (Vsup) must be maintained above 2.5V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.
TPS2550DRVT Features
Supplied from 3.3V
Resistance of 100mOhm
1 channels
TPS2550DRVT Applications
There are a lot of Texas Instruments TPS2550DRVT Power Switches ICs applications.
- Solid-State Drives
- PDAs
- HDD, SSD
- HDD and SSD
- Telecom and Network Systems
- Hot Swap
- Portable GPS
- Portable Video Game Players
- Hot Swaps
- USB Power Distribution
