TPS2551DBVT
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 625mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS2551 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 625mW |
| Output Current | 1.1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Nominal Input Voltage | 6.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 85m Ω |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2551DBVT Overview
It is packaged in the form of a Tape & Reel (TR).This file is included in package SOT-23-6.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 1.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts on this LED driver.As far as features are concerned, the LED driving board has Slew Rate Controlled.As you can see, it comes from the TPS2551 family.It consists of 6 terminations in total.In order to operate, the 6 pins are used.Currently, there are 1 functions associated with the lighting driver.The supply voltage can be 3.3V for high efficiency.As a result, it is mounted in the manner of Surface Mount.A total of 6 pins are included in this LED driver.It has 85mOhm resistance.When this case is used, the output current is set to 1.1A.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.You can select from 1 channels.This LED driving board can accept voltages up to 6.5V volts as an input.As a minimum input voltage, it requires 2.5V volts.
TPS2551DBVT Features
Supplied from 3.3V
Resistance of 85mOhm
1 channels
TPS2551DBVT Applications
There are a lot of Texas Instruments TPS2551DBVT Power Switches ICs applications.
- Hard Disk Drives
- PC Card Hot Swap
- Wireless/Networking Cards
- Portable Devices
- Storage (HDDs, SSDs)
- PC Cards
- Hot Swaps
- Low Voltage I/O System Power
- USB3.1 Power Delivery
- USB Ports/Hubs
