TPS2551DRVT
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 9.695537mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 1.33W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2551 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1.1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Nominal Input Voltage | 6.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 100m Ω |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2551DRVT Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).In the 6-WDFN Exposed Pad package, it is included.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type it owns.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.There is a default setting of 1 for output.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.The lighting driver has Slew Rate Controlled features.It comes under the family of TPS2551.A total of 6 terminations can be found in it.During operation, the 6 pins are used.Currently, there are 1 functions associated with the lighting driver.From the lighting driver, there is a maximum output of 1.1AV.With a supply voltage of 3.3V, high efficiency is possible.Surface Mount is mounted in the way of this lighting driver.A total of 6 pins are present on it.The LED driver has 100mOhm resistance.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.We currently have 1 channels available.It has a maximum input voltage of 6.5V volts.A minimum input voltage of 2.5V volts is required for this LED driver.
TPS2551DRVT Features
Supplied from 3.3V
Resistance of 100mOhm
1 channels
TPS2551DRVT Applications
There are a lot of Texas Instruments TPS2551DRVT Power Switches ICs applications.
- PDAs
- USB3.1 Power Delivery
- Portable GPS Device
- Hot Swaps
- Set-top-box
- Portable Devices
- Low Voltage I/O System Power
- Hot Swap
- Solid State Drivers
- Smartphone and PDA
