TPS2552DBVT-1
| Parameters | |
|---|---|
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 285mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS2552 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.2A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 285mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Nominal Input Voltage | 6.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 85m Ω |
| Height | 1.45mm |
TPS2552DBVT-1 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This file is included in package SOT-23-6.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It has a total of Slew Rate Controlled, Status Flag features.It comes under the family of TPS2552.A total of 6 terminations can be found in it.The operation is performed through the 6 pins.It contains 1 functions.In this case, the LED driving board can produce only 1.5AV as its maximum output.The maximum output current is reduced to 1.2A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 5V.There are 6 pins in total on this board.Currently, the LED driving board has a resistance of 85mOhm ohms.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.You can select from 1 channels.This LED driver can handle voltages up to 6.5V volts.There is a minimum input voltage of 2.5V volts.
TPS2552DBVT-1 Features
Supplied from 5V
Resistance of 85mOhm
1 channels
TPS2552DBVT-1 Applications
There are a lot of Texas Instruments TPS2552DBVT-1 Power Switches ICs applications.
- HDD, SSD
- Portable GPS
- Portable/Handheld Devices
- Portable GPS Device
- Notebook and Tablet Computers
- Storage Drives
- Portable Music Players
- PC Card Hot Swap
- Wireless Modem Data Cards
- Telecom and Network Systems
