TPS2552DRVR-1
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2552 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 100m Ω |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 18 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 9.695537mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
TPS2552DRVR-1 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).Package 6-WDFN Exposed Pad contains it.Mounting type Surface Mount is selected for the LED driving board.There is a General Purpose switch type associated with it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.In this LED driver, there are no outputs available.The LED driving board operates at Not Required volts.The maximum output voltage of this LED driver is N-Channel volts.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.The TPS2552 family consists of this type.The termination count is 6.For operation, 6 pins are used.It contains 1 functions.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.Supply voltages of 5V allow for high efficiency.It is equipped with a total of 6 pins.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.We currently have 1 channels available.It has a maximum input voltage of 6.5V volts.Input voltage must be at least 2.5V volts.
TPS2552DRVR-1 Features
Supplied from 5V
1 channels
TPS2552DRVR-1 Applications
There are a lot of Texas Instruments TPS2552DRVR-1 Power Switches ICs applications.
- PC Card Hot Swap
- Set-Top Boxes
- USB Power Distribution
- Smart Phones, Feature Phones
- Wearable Devices
- USB3.1 Power Delivery
- USB Protection
- Hot Swap
- Telecom and Network Systems
- Storage Drives
