TPS2552DRVT-1
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 9.695537mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 715mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2552 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.2A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 715mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Nominal Input Voltage | 6.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 100m Ω |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
TPS2552DRVT-1 Overview
Tape & Reel (TR) is the way it's packaged.There is a 6-WDFN Exposed Pad package that includes it.The mounting type of the LED driver is Surface Mount.It owns the General Purpose switch type.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.There are 1 outputs available on this lighting driver.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts.There are Slew Rate Controlled, Status Flag features available on the LED driving board.This object belongs to the TPS2552 family.It has a total of 6 terminations.In order to operate, 6 pins are used.There are 1 functions of the LED driver.The maximum output of the LED driving board is 1.5AV.The maximum output current drops to 1.2A in order to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.As a result, it has a total of 6 pins.It has a resistance of 100mOhm.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.The total number of channels is 1.As far as input voltage goes, its maximum is 6.5V volts.The minimum input voltage is 2.5V volts.
TPS2552DRVT-1 Features
Supplied from 5V
Resistance of 100mOhm
1 channels
TPS2552DRVT-1 Applications
There are a lot of Texas Instruments TPS2552DRVT-1 Power Switches ICs applications.
- Solid State Drivers
- USB Ports/Hubs
- PC Card Hot Swap
- Hot Swap
- HDD and SSD
- USB Power Distribution
- Smart Phones, Feature Phones
- PC Cards
- Various applications equipped with buttons
- USB Power Distribution
