banner_page

TPS2553DBVR-1

N-Channel 0.95mm PMIC TPS2553 6 Pin 5V SOT-23-6


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2553DBVR-1
  • Package: SOT-23-6
  • Datasheet: PDF
  • Stock: 562
  • Description: N-Channel 0.95mm PMIC TPS2553 6 Pin 5V SOT-23-6 (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 23 hours ago)
Mounting Type Surface Mount
Package / Case SOT-23-6
Surface Mount YES
Number of Pins 6
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e4
Feature Slew Rate Controlled, Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Resistance 85mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.95mm
Base Part Number TPS2553
Pin Count 6
Number of Outputs 1
Output Type N-Channel
Max Output Current 1.5A
Number of Channels 1
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold YES
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 2.5V
Max Input Voltage 6.5V
Nominal Input Voltage 6.5V
Ratio - Input:Output 1:1
Voltage - Load 2.5V~6.5V
Fault Protection Current Limiting (Adjustable), Over Temperature, UVLO
Rds On (Typ) 85m Ω
Height 1.45mm
Length 2.9mm
Width 1.6mm
Thickness 1.2mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2553DBVR-1 Overview


It is packaged in the form of a Tape & Reel (TR).It is included in the package SOT-23-6.The lighting driver is mounted in the Surface Mount position.A General Purpose switch type is owned by it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The LED driver has 1 outputs.A supply voltage of Not Required is required for it to operate.Voltage output is N-Channel volts at maximum.This LED driving board is equipped with Slew Rate Controlled, Status Flag features in order for it to be useful.I believe it belongs to the TPS2553 family.As a result, there are 6 terminations.The 6 pins are used to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.To meet the operation criteria, the maximum output current drops to 1.5A.The supply voltage can be 5V for high efficiency.6 pins are connected to it in total.It has a resistance of 85mOhm.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.In total, 1 channels are available.The maximum input voltage is 6.5V volts.A minimum input voltage of 2.5V volts is required for this LED driver.

TPS2553DBVR-1 Features


Supplied from 5V
Resistance of 85mOhm
1 channels

TPS2553DBVR-1 Applications


There are a lot of Texas Instruments TPS2553DBVR-1 Power Switches ICs applications.

  • Telecom and Network Systems
  • Notebook PC
  • Portable Video Game Players
  • Storage (HDDs, SSDs)
  • Portable GPS
  • Wireless/Networking Cards
  • Mobile Communication Devices
  • Notebook and Tablet Computers
  • PDAs
  • Portable/Handheld Devices

Write a review

Note: HTML is not translated!
    Bad           Good