Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Surface Mount |
YES |
Number of Pins |
6 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Slew Rate Controlled, Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Resistance |
85mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Power Rating |
625mW |
Max Power Dissipation |
625mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.95mm |
Base Part Number |
TPS2553 |
Pin Count |
6 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
1.5A |
Number of Channels |
1 |
Voltage |
6.5V |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Current |
1.5A |
Output Configuration |
High Side |
Power Dissipation |
625mW |
Output Current |
1.5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
YES |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
2.5V |
Max Input Voltage |
6.5V |
Nominal Input Voltage |
6.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.5V~6.5V |
Fault Protection |
Current Limiting (Adjustable), Over Temperature, UVLO |
Rds On (Typ) |
85m Ω |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2553DBVT-1 Overview
Tape & Reel (TR) is how it's packaged.There is a package for it in the SOT-23-6 package.In this case, the LED driving board is mounted as Surface Mount.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The LED driver is equipped with 1 outputs.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts.This LED driving board is equipped with Slew Rate Controlled, Status Flag features in order for it to be useful.It belongs to the family TPS2553.It contains 6 terminations.It is necessary to use the 6 pins in order to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.Maximum output current falls to 1.5A when operation criteria are met.The supply voltage can be 5V for high efficiency.It is equipped with a total of 6 pins.85mOhm resistance is present in the lighting driver.In this case, the output current is set to 1.5A.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.In total, 1 channels are available.Its maximum input voltage is 6.5V volts.A voltage of 2.5V volts is the minimum input voltage.
TPS2553DBVT-1 Features
Supplied from 5V
Resistance of 85mOhm
1 channels
TPS2553DBVT-1 Applications
There are a lot of Texas Instruments TPS2553DBVT-1 Power Switches ICs applications.
- USB Ports/Hubs
- Hot-Swap Systems
- USB Power Distribution
- Various applications equipped with buttons
- Set-Top Boxes
- Portable/Handheld Devices
- Telecom and Network Systems
- Mobile Communication Devices
- Hot Swap
- Wireless Headsets