TPS2554DRCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2554 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2.5A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 135μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Turn On Delay Time | 5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 73m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2554DRCR Overview
It is packaged in the form of a Tape & Reel (TR).It is included with the 10-VFDFN Exposed Pad package as well.It has been mounted as Surface Mount on the LED driver.It owns General Purpose switch type.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.There are 1 outputs available on this lighting driver.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It has a total of Status Flag features.The TPS2554 family consists of this type.As a result, there are 10 terminations.It is necessary to use the 10 pins in order to operate the LED driver.It consists of 1 functions.This results in the maximum output current dropping to 2.5A to meet the operation criteria.Using a voltage of 5V allows for high efficiency.It is equipped with a total of 10 pins.It has 120mOhm resistance.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 1 channels available.There is a maximum input voltage of 5.5V volts.There is a minimum input voltage of 4.5V volts.
TPS2554DRCR Features
Supplied from 5V
Resistance of 120mOhm
1 channels
TPS2554DRCR Applications
There are a lot of Texas Instruments TPS2554DRCR Power Switches ICs applications.
- PC Cards
- Solid State Drivers
- Set-Top Boxes
- Hot Swaps
- Wearable Devices
- Various applications equipped with buttons
- Portable Music Players
- Notebook PC
- Portable Video Game Players
- Low Voltage I/O System Power
