TPS2556DRBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 35mOhm |
| Max Power Dissipation | 2.403W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2556 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 6.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 120μA |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Turn On Delay Time | 9 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Turn-Off Delay Time | 6 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 22m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2556DRBR Overview
Tape & Reel (TR) is the way it's packaged.It is included in the package 8-VDFN Exposed Pad.It has been mounted as Surface Mount on the LED driver.There is a General Purpose switch type associated with it.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.In this LED driver, there are no outputs available.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It has a total of Slew Rate Controlled, Status Flag features.The TPS2556 family consists of this type.As a result, there are 8 terminations.In order to operate, 8 pins are used.As far as the lighting driver is concerned, there are 1 functions.This operation requires the maximum output current to be decreased to 500mA.High efficiency is possible at 5V supply voltage.This LED driver is equipped with a total of 8 pins.The LED driver has 35mOhm resistance.This case results in a 5A output current.The total number of channels is 1.Optimal efficiency requires a voltage of 6.5V.There is a maximum input voltage of 6.5V volts.As a minimum input voltage, it requires 2.5V volts.It requires 120μA current to operate.In the case of this electrical component, it is classified as General Purpose.
TPS2556DRBR Features
Supplied from 5V
Resistance of 35mOhm
1 channels
TPS2556DRBR Applications
There are a lot of Texas Instruments TPS2556DRBR Power Switches ICs applications.
- HDD and SSD
- Low Voltage I/O System Power
- PDAs
- Portable/Handheld Devices
- Smartphone and PDA
- Gaming
- PC Card Hot Swap
- Telecom and Network Systems
- USB Power Distribution
- Portable GPS
