Parameters | |
---|---|
Rds On (Typ) | 22m Ω |
Height | 1mm |
Length | 3mm |
Width | 3mm |
Thickness | 880μm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
Contact Plating | Gold |
Mounting Type | Surface Mount |
Package / Case | 8-VDFN Exposed Pad |
Surface Mount | YES |
Number of Pins | 8 |
Operating Temperature | -40°C~125°C TJ |
Packaging | Tape & Reel (TR) |
JESD-609 Code | e4 |
Feature | Slew Rate Controlled, Status Flag |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 2 (1 Year) |
Number of Terminations | 8 |
ECCN Code | EAR99 |
Resistance | 22mOhm |
Power Rating | 2.403W |
Max Power Dissipation | 2.403W |
Terminal Position | DUAL |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Supply Voltage | 5V |
Terminal Pitch | 0.65mm |
Base Part Number | TPS2556 |
Pin Count | 8 |
Number of Outputs | 1 |
Output Type | N-Channel |
Max Output Current | 5A |
Number of Channels | 1 |
Voltage | 6.5V |
Interface | On/Off |
Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
Nominal Supply Current | 2μA |
Current | 5A |
Output Configuration | High Side |
Power Dissipation | 2.4W |
Output Current | 5A |
Voltage - Supply (Vcc/Vdd) | Not Required |
Max Supply Current | 120μA |
Adjustable Threshold | YES |
Input Type | Non-Inverting |
Turn On Delay Time | 9 ms |
Switch Type | General Purpose |
Min Input Voltage | 2.5V |
Max Input Voltage | 6.5V |
Nominal Input Voltage | 6.5V |
Turn-Off Delay Time | 6 ms |
Ratio - Input:Output | 1:1 |
Voltage - Load | 2.5V~6.5V |
Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
The power-distribution switches TPS2556DRBT are designed for use in situations where precise current limitation is required, large capacitive loads are present, or short circuits are likely to occur. Through the use of an external resistor, these devices provide a configurable current-limit threshold between 500 mA and 5.0 A (typ). The rise and fall times of the power switch are regulated to reduce current surges during turn-on and turn-off.
3.5-pS Fast Overcurrent Response (typ)
High-side MOSFET of 22 mQ
Working Voltage: 2.5 to 6.5 V
Maximum Standby Supply Current of 2 pA
Integrated Soft-Start
System-Level ESD Capable at 15 kV and 8 kV
UL Listed* - E169910 File No.
Nemko & CB Certification*
USB ports and hub
"Digital TV"
Setting-Top Boxes
VOIP Telephones