TPS2556QDRBRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Weight | 24.012046mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2556 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Supply Voltage-Max (Vsup) | 6.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 22m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2556QDRBRQ1 Overview
The package is in the form of a Tape & Reel (TR).There is a package for it in the 8-VDFN Exposed Pad package.A Surface Mount mounting is used for the LED driving board.This switch is of type General Purpose.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.The LED driver has 1 outputs.The LED driving board operates with a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.There are Slew Rate Controlled, Status Flag features available on the LED driving board.The TPS2556 family consists of this type.The termination count is 8.8 pins are used for operation.As far as the lighting driver is concerned, there are 1 functions.In order to meet the operation criteria, the maximum output current drops to 5A.With a supply voltage of 5V, high efficiency is possible.Surface Mount is mounted in the way.This electrical component can be found in the Automotive, AEC-Q100 series.When this is the case, the output current is set to 5A.The LED driver is configured with a maximum supply voltage of 6.5V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 2.5V.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.
TPS2556QDRBRQ1 Features
Supplied from 5V
1 channels
TPS2556QDRBRQ1 Applications
There are a lot of Texas Instruments TPS2556QDRBRQ1 Power Switches ICs applications.
- Smart Phones, Feature Phones
- PC Card Hot Swap
- Hot Swaps
- Storage (HDDs, SSDs)
- Portable Devices
- Telecom and Network Systems
- Wireless Modem Data Cards
- USB Power Distribution
- Hot Swap
- PC Cards
