Parameters | |
---|---|
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
Contact Plating | Gold |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 8-VDFN Exposed Pad |
Number of Pins | 8 |
Weight | 24.012046mg |
Operating Temperature | -40°C~125°C TJ |
Packaging | Tape & Reel (TR) |
JESD-609 Code | e4 |
Feature | Slew Rate Controlled, Status Flag |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 2 (1 Year) |
Number of Terminations | 8 |
Termination | SMD/SMT |
ECCN Code | EAR99 |
Resistance | 22mOhm |
Power Rating | 2.403W |
Max Power Dissipation | 2.403W |
Terminal Position | DUAL |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Supply Voltage | 5V |
Terminal Pitch | 0.65mm |
Base Part Number | TPS2557 |
Pin Count | 8 |
Number of Outputs | 1 |
Output Type | N-Channel |
Max Output Current | 5A |
Number of Channels | 1 |
Voltage | 6.5V |
Interface | On/Off |
Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
Current | 5A |
Output Configuration | High Side |
Power Dissipation | 2.4W |
Output Current | 5A |
Voltage - Supply (Vcc/Vdd) | Not Required |
Adjustable Threshold | YES |
Input Type | Non-Inverting |
Turn On Delay Time | 9 ms |
Switch Type | General Purpose |
Min Input Voltage | 2.5V |
Max Input Voltage | 6.5V |
Nominal Input Voltage | 6.5V |
Turn-Off Delay Time | 6 ms |
Ratio - Input:Output | 1:1 |
Voltage - Load | 2.5V~6.5V |
Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
Rds On (Typ) | 22m Ω |
Height | 1mm |
Length | 3mm |
Width | 3mm |
Thickness | 880μm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
The TPS2557DRBT power-distribution switch is designed for applications that need precise current limiting or that include significant capacitive loads and short circuits. These devices have an external resistor that can be used to preset a current-limit threshold between 500 mA and 5.0 A (typ). To minimize current surges during turn on/off, the rise and fall times of the power switch are managed.
When the output load reaches the current-limit threshold, the TPS2557DRBT device switches to a constant-current mode, limiting the output current to a safe level. During overcurrent and overtemperature conditions, the FAULT logic output asserts low.
15 kV / 8 kV System-Level ESD Capable
UL Listed* – File No. E169910
CB & Nemko Certification*
*RILIM ≥ 24.9 k? (5A maximum)
Built-in Soft-Start
2-μA Maximum Standby Supply Current
Operating Range: 2.5 V to 6.5 V
22-m? High-Side MOSFET
Fast Overcurrent Response - 3.5-μS (typ)
+/- 6.5% Current-Limit Accuracy at 4.5 A
Adjustable Current Limit, 500 mA–5 A (typ)
Meets USB Current-Limiting Requirements
Set-Top Boxes
VOIP Phones
Digital TV
USB Ports/Hubs
Electrical Circuit