banner_page

TPS2559DRCT

N-Channel 0.5mm PMIC TPS2559 10 Pin 5V 10-VFDFN Exposed Pad


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2559DRCT
  • Package: 10-VFDFN Exposed Pad
  • Datasheet: -
  • Stock: 586
  • Description: N-Channel 0.5mm PMIC TPS2559 10 Pin 5V 10-VFDFN Exposed Pad (Kg)

Details

Tags

Parameters
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Output Configuration High Side
Output Current 5.5A
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold YES
Input Type Non-Inverting
Turn On Delay Time 15 ms
Switch Type General Purpose
Turn-Off Delay Time 8 ms
Threshold Voltage 2.36
Ratio - Input:Output 1:1
Voltage - Load 2.5V~6.5V
Fault Protection Current Limiting (Adjustable), Over Temperature, UVLO
Rds On (Typ) 13m Ω
Height 1mm
Length 3mm
Width 3mm
Thickness 900μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 10-VFDFN Exposed Pad
Number of Pins 10
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e4
Feature Slew Rate Controlled, Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 10
Resistance 13mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.5mm
Base Part Number TPS2559
Number of Outputs 1
Output Type N-Channel
Supply Voltage-Max (Vsup) 6.5V
Supply Voltage-Min (Vsup) 2.5V
Number of Channels 1

TPS2559DRCT Overview


It is packaged in the manner of a Tape & Reel (TR).There is a 10-VFDFN Exposed Pad package that includes it.In this case, the LED driving board is mounted as Surface Mount.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver has 1 outputs.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.Currently, the LED driving board is equipped with Slew Rate Controlled, Status Flag features.It belongs to the family TPS2559.As a result, there are 10 terminations.It is necessary to use the 10 pins in order to operate the LED driver.Currently, the lighting driver has a total of 1 functions.With a supply voltage of 5V, high efficiency is possible.It is mounted in the way of Surface Mount.The LED driver has 13mOhm resistance.As a result, the output current is set to 5.5A.The maximum supply voltage for this LED driver is 6.5V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 2.5V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.The total number of channels is 1.

TPS2559DRCT Features


Supplied from 5V
Resistance of 13mOhm
1 channels

TPS2559DRCT Applications


There are a lot of Texas Instruments TPS2559DRCT Power Switches ICs applications.

  • Various applications equipped with buttons
  • Hot-Swap Systems
  • Wearable Devices
  • PDAs
  • Set-Top Boxes
  • Solid State Drivers
  • HDD and SSD
  • USB Protection
  • Solid-State Drives
  • Mobile Communication Devices

Write a review

Note: HTML is not translated!
    Bad           Good