TPS2559QWDRCTQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Resistance | 13mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2559 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 5.5A |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 6.5V |
| Threshold Voltage | 2.36 |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 13m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2559QWDRCTQ1 Overview
As you can see, it's packaged in the way of a Cut Tape (CT).In the 10-VFDFN Exposed Pad package, it is included.This LED driving board is mounted using the mounting type Surface Mount.This switch is of type General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver is equipped with 1 outputs.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts.It has a total of Slew Rate Controlled, Status Flag features.I believe it belongs to the TPS2559 family.It contains 10 terminations.The 10 pins are used to operate the LED driver.It contains 1 functions.The maximum output current must drop to 5.5A to meet the operation criteria.Supply voltages of 5V allow for high efficiency.There is 13mOhm resistance on the LED driver.Electrical components such as this are included in the Automotive, AEC-Q100 series.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 2.5V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 available channels.
TPS2559QWDRCTQ1 Features
Supplied from 5V
Resistance of 13mOhm
1 channels
TPS2559QWDRCTQ1 Applications
There are a lot of Texas Instruments TPS2559QWDRCTQ1 Power Switches ICs applications.
- Gaming
- Wireless Headsets
- Hot-Swap Systems
- Low Voltage I/O System Power
- Handheld Devices
- Portable GPS
- USB3.1 Power Delivery
- Portable/Handheld Devices
- HDD and SSD
- Solid State Drivers
