TPS2560ADRCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2560 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 2.5A |
| Supply Voltage-Max (Vsup) | 6.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 2.8A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 44m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2560ADRCR Overview
Tape & Reel (TR) is the way it's packaged.There is a package for it in the 10-VFDFN Exposed Pad package.This LED driving board is mounted using the mounting type Surface Mount.There is a General Purpose switch type associated with it.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The lighting driver has a total of 2 outputs that are available for use.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.Currently, the LED driving board is equipped with Slew Rate Controlled, Status Flag features.It is part of the TPS2560 family of LED drivers.A total of 10 terminations have been found in it.During operation, the 10 pins are used.It consists of 1 functions.This results in the maximum output current dropping to 2.5A to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.There are 10 pins in total on this board.Vsup (maximum supply voltage) is set to 6.5V.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.This LED driving board can accept voltages up to 5.5V volts as an input.Input voltage must be at least 4.5V volts.
TPS2560ADRCR Features
Supplied from 5V
1 channels
TPS2560ADRCR Applications
There are a lot of Texas Instruments TPS2560ADRCR Power Switches ICs applications.
- Portable Music Players
- Smart Phones, Feature Phones
- Wearable Devices
- Storage (HDDs, SSDs)
- Mobile Communication Devices
- HDD, SSD
- Various applications equipped with buttons
- Wireless Headsets
- Gaming
- USB Power Distribution
