TPS2560DRCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 2.403W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2560 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 2.5A |
| Number of Channels | 1 |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Turn On Delay Time | 9 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Turn-Off Delay Time | 6 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 44m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2560DRCR Description
The TPS2560DRCR is a dual-channel power-distribution switch designed for use in situations where precise current limitation is necessary, as well as those involving significant capacitive loads and short circuits. Through an external resistor, these devices provide a configurable current-limit threshold between 250 mA and 2.8 A (typ) per channel. The rise and fall times of the power switch are regulated to reduce current surges during turn-on and turn-off.
When the output load exceeds the current-limit threshold, each channel of the TPS2560DRCR device limits the output current to a safe level by switching into a constant-current mode. Each channel's FAULTx logic output independently asserts low when there is an overcurrent or temperature problem.
TPS2560DRCR Features
Two 44-m? high-side MOSFETs
Operating range: 2.5 V to 6.5 V
2-μA maximum standby supply current
Built-in soft-start
15-kV, 8-kV system-level ESD capable
UL listed: file no. E169910
CB and Nemko certified
Two separate current limiting channels
Meets USB current-limiting requirements
Adjustable current limit: 250 mA to 2.8 A (typ)
± 7.5% current-limit accuracy at 2.8 A
Fast overcurrent response: 3.5 μs (typ)
TPS2560DRCR Applications
USB ports, hubs
Digital TVs
Set-top boxes
VOIP phones
Switch
