TPS2560DRCT
| Parameters | |
|---|---|
| Nominal Supply Current | 2.5A |
| Current | 2.5A |
| Output Configuration | High Side |
| Power Dissipation | 2.4W |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 9 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Nominal Input Voltage | 6.5V |
| Turn-Off Delay Time | 6 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 44m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 50mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Power Rating | 2.403W |
| Max Power Dissipation | 2.403W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2560 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Voltage | 6.5V |
| Interface | On/Off |
TPS2560DRCT Overview
Tape & Reel (TR) is the way it's packaged.It's included in the 10-VFDFN Exposed Pad package.This lighting drivere has a mounting type of Surface Mount.A General Purpose switch type is owned by it.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.It is possible to use 2 outputs in the lighting driver.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Features of the lighting driver are Slew Rate Controlled, Status Flag.The TPS2560 family consists of this type.In total, there are 10 terminations.In order to operate, 10 pins are used.The LED driving board has a total of 1 functions.It is equipped with a total of 10 pins.Lighting drivers with 50mOhm resistance are used.This results in a 2.5A output current.There are a total of 1 available channels.A maximum input voltage of 6.5V volts can be applied to it.As far as input voltage goes, it has a minimum of 2.5V volts.For this electrical component, General Purpose is the classification.
TPS2560DRCT Features
Resistance of 50mOhm
1 channels
TPS2560DRCT Applications
There are a lot of Texas Instruments TPS2560DRCT Power Switches ICs applications.
- Various applications equipped with buttons
- PC Cards
- Hot Swap
- Wireless Headsets
- PC Card Hot Swap
- Wireless/Networking Cards
- Storage (HDDs, SSDs)
- USB3.1 Power Delivery
- USB Power Distribution
- HDD, SSD
