banner_page

TPS2561ADRCR

N-Channel 0.5mm PMIC TPS2561 10 Pin 5V 10-VFDFN Exposed Pad


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2561ADRCR
  • Package: 10-VFDFN Exposed Pad
  • Datasheet: -
  • Stock: 630
  • Description: N-Channel 0.5mm PMIC TPS2561 10 Pin 5V 10-VFDFN Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case 10-VFDFN Exposed Pad
Surface Mount YES
Number of Pins 10
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e4
Feature Slew Rate Controlled, Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 10
ECCN Code EAR99
Type General Purpose
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.5mm
Base Part Number TPS2561
Pin Count 10
Number of Outputs 2
Output Type N-Channel
Max Output Current 2.5A
Number of Channels 1
Interface On/Off
Nominal Supply Current 2.8A
Output Configuration High Side
Output Current 2.5A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 125μA
Adjustable Threshold YES
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 2.5V
Max Input Voltage 6.5V
Ratio - Input:Output 1:2
Voltage - Load 2.5V~6.5V
Fault Protection Current Limiting (Adjustable), Over Temperature, UVLO
Rds On (Typ) 44m Ω
Height 1mm
Length 3mm
Width 3mm
Thickness 900μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2561ADRCR Overview


The package is in the form of a Tape & Reel (TR).It is included with the 10-VFDFN Exposed Pad package as well.The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.The LED driver has 2 outputs.A supply voltage of Not Required is required for it to operate.Voltage output is N-Channel volts at maximum.Currently, the LED driving board is equipped with Slew Rate Controlled, Status Flag features.It is a member of the TPS2561 family.It has a total of 10 terminations.The 10 pins are used for the operation of the system.The LED driver has 1 functions.The maximum output current drops to 2.5A in order to meet the operation criteria.A supply voltage of 5V leads to high efficiency.10 pins are connected to it in total.This results in a 2.5A output current.We currently have 1 channels available.Voltage input is limited to 6.5V volts.As far as input voltage goes, it has a minimum of 2.5V volts.It requires 125μA current to operate.General Purpose?is?the?classification?for?this?electrical?component.

TPS2561ADRCR Features


Supplied from 5V
1 channels

TPS2561ADRCR Applications


There are a lot of Texas Instruments TPS2561ADRCR Power Switches ICs applications.

  • Hot Swap
  • PC Card Hot Swap
  • Smartphone and PDA
  • Solid-State Drives
  • Portable GPS
  • Handheld Devices
  • Portable Devices
  • Wireless Headsets
  • Hot-Swap Systems
  • Hot Swap

Write a review

Note: HTML is not translated!
    Bad           Good