TPS2561AQDRCRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Weight | 39.292439mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2561 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 2.5A |
| Supply Voltage-Max (Vsup) | 6.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 44m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2561AQDRCRQ1 Overview
Tape & Reel (TR) is how it's packaged.It's included in the 10-VFDFN Exposed Pad package.A Surface Mount mounting is used for the LED driving board.This switch is of type General Purpose.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.It is possible to use 2 outputs in the lighting driver.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts on this LED driver.There are Slew Rate Controlled, Status Flag features available on the LED driving board.It is part of the TPS2561 family of LED drivers.The termination count is 10.For operation, we use the 10 pins.It has 1 functions.It is necessary to reduce the maximum output current to 2.5A to meet the operation criteria.Using a voltage of 5V allows for high efficiency.As a result, it is mounted in the manner of Surface Mount.It is part of the Automotive, AEC-Q100 series.When this is the case, the output current is set to 2.5A.A maximum supply voltage of 6.5V is set in Vsup.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 available channels.
TPS2561AQDRCRQ1 Features
Supplied from 5V
2 channels
TPS2561AQDRCRQ1 Applications
There are a lot of Texas Instruments TPS2561AQDRCRQ1 Power Switches ICs applications.
- USB Power Distribution
- Mobile Communication Devices
- Portable GPS
- Hot Swap
- PDAs
- Gaming
- Solid State Drivers
- Hot Swaps
- Low Voltage I/O System Power
- USB3.1 Power Delivery
