TPS2561AQDRCTQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Weight | 39.292439mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2561 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 6.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 44m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2561AQDRCTQ1 Overview
The LED driver's packaged as a Tape & Reel (TR).The 10-VFDFN Exposed Pad package includes it.This LED driving board is mounted using the mounting type Surface Mount.It owns the General Purpose switch type.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.The lighting driver has a total of 2 outputs that are available for use.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts on this LED driver.Features of the lighting driver are Slew Rate Controlled, Status Flag.It belongs to the TPS2561 family.It has a total of 10 terminations.It is necessary to use the 10 pins in order to operate the LED driver.The LED driving board has a total of 1 functions.A supply voltage of 5V leads to high efficiency.As a result, it is mounted in the manner of Surface Mount.It is part of the Automotive, AEC-Q100 series.The output current is set to 2.5A in this case.The maximum supply voltage for this lighting driver is set to 6.5V (Vsup).This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.In total, 2 channels are available.
TPS2561AQDRCTQ1 Features
Supplied from 5V
2 channels
TPS2561AQDRCTQ1 Applications
There are a lot of Texas Instruments TPS2561AQDRCTQ1 Power Switches ICs applications.
- Set-Top Boxes
- Storage Drives
- Hot-Swap Systems
- Smart Phones, Feature Phones
- Hot Swaps
- Low Voltage I/O System Power
- USB Ports/Hubs
- Solid-State Drives
- Portable Devices
- Portable/Handheld Devices
