TPS2561QDRCRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2561 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 2.5A |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 2.8A |
| Output Configuration | High Side |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 125μA |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 44m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2561QDRCRQ1 Overview
The package is in the form of a Tape & Reel (TR).This file is included in package 10-VFDFN Exposed Pad.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.There is a default setting of 2 for output.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.This LED driving board is equipped with Slew Rate Controlled, Status Flag features in order for it to be useful.There is a TPS2561 family of things that it belongs to.The termination count is 10.10 pins are used for operation.It contains 1 functions.Maximum output current falls to 2.5A when operation criteria are met.With a supply voltage of 5V, high efficiency is possible.It is part of the Automotive, AEC-Q100 series.This results in a 2.5A output current.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.There are a total of 2 channels to choose from.Its maximum input voltage is 6.5V volts.As a minimum input voltage, it requires 2.5V volts.This system has a maximum current requirement of 125μA.
TPS2561QDRCRQ1 Features
Supplied from 5V
2 channels
TPS2561QDRCRQ1 Applications
There are a lot of Texas Instruments TPS2561QDRCRQ1 Power Switches ICs applications.
- Hot Swap
- Portable GPS Device
- USB Power Distribution
- PC Card Hot Swap
- Notebook and Tablet Computers
- USB Power Distribution
- Portable GPS
- Portable Devices
- PC Cards
- Low Voltage I/O System Power
