TPS25910RSAR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Thermal Limit, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~20V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Depth | 4.1mm |
| Base Part Number | TPS25910 |
| Max Output Current | 5A |
| Supply Voltage-Max (Vsup) | 20V |
| Power Supplies | 3/20V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Nominal Supply Current | 11μA |
| Output Current | 5A |
| Adjustable Threshold | YES |
| Turn On Delay Time | 10 μs |
| Supply Current-Max (Isup) | 5mA |
| Turn-Off Delay Time | 2.5 μs |
| Threshold Voltage | 2.85 |
| Internal Switch(s) | Yes |
| Max Junction Temperature (Tj) | 125°C |
| Programmable Features | Current Limit, Slew Rate |
| Feature Pins | /EN, /IFLT, ILIM |
| On-State Resistance | 29.5mOhm |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS25910RSAR Overview
You get it with the 16-VQFN Exposed Pad package.Channel 1 is currently available.The package looks like a Tape & Reel (TR).Hot-swappable device terminates wHot-swappable deviceh 16 in total.The terminal position of the device is QUAD.The supply voltage 3.3V is necessary for high efficiency.This is set up in the same way as Surface Mount.This electrical component belongs to the Hot Swap Controller classification.To ensure reliable operation, set the temperature to -40°C~125°C.A General Purpose application is available for the device.The article is featured in Thermal Limit, UVLO.If the power source is 3V~20VV, it should work fine.Hot-swappable device belongs to the TPS25910 family of numbers.This device uses 16 pins for operation.There is nothing else in Power Management Circuits but this gadget.Current Limit, Slew Rate is the number of features it can be programmed with.Surface Mount directs its position.For normal operation, Vsup should be maintained above 3V.20V (maximum supply voltage) is set.As far as the power supplies are concerned, the part has the character 3/20V.The maximum supply current it requires to operate is 5mA.To meet the operation criteria, the maximum output current drops to 5A.
TPS25910RSAR Features
Features of Thermal Limit, UVLO
Programmable features of Current Limit, Slew Rate
TPS25910RSAR Applications
There are a lot of Texas Instruments TPS25910RSAR hot swap controllers applications.
- Power monitoring
- Short circuit protection
- Disconnect faulty loads before supply voltage drops
- Short-circuit protection in real time
- Board or blade insertion into live backplanes
- Active current limit
- Current limit and current foldback limit functions
- Switch
- Load transient protection
- Inrush current control
