TPS2592ALDRCT
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Latched Fault, OVP, Thermal Limit |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2592 |
| Function | Electronic Fuse |
| Max Output Current | 5A |
| Operating Supply Voltage | 12V |
| Number of Channels | 1 |
| Max Supply Voltage | 13.8V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 100μA |
| Voltage - Input | 4.5V~13.8V |
| Max Supply Current | 650μA |
| Current - Output | 3.4A |
| Adjustable Threshold | YES |
| Accuracy | ±15% |
| Nominal Input Voltage | 12V |
| Threshold Voltage | 4.3 |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2592ALDRCT Overview
There is a package called Cut Tape (CT) that contains buck boost converter.Depending on how 10-VFDFN Exposed Pad packages voltage regulator, voltage regulator will be packaged in the same way.The current regulator is mounted by Surface Mount.A maximum operating temperature of -40°C~85°C TA should not be exceeded during operation.The input voltage of 4.5V~13.8V is supported as an input voltage.An example of this is the 10 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.This is a member of the TPS2592 family.In computers and other communication constant current regulators, 10 pins are pronged contacts that form part of a signal interface.The current regulator is mounted on the Surface Mount axis.The supply voltage of this electrical constant current is 12V.In addition to the maximum design flexibility that 3.4A provides, its output current is also quite high.This power converter uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.A significant number of channels are growing strongly/weakly: 1.As a result, it allows 13.8V to be supplied with its maximum voltage.There are several current regulations that are included in the Power Management Circuits part, which is part of the entire assembly.With the minimum supply voltage of 4.5V, it is able to operate.100μA represents the operating supply current supplied for its operation.In order to ensure high efficiency, the supply voltage should be maintained at 12V.A maximum output current makes 5A highly flexible in terms of design.The maximal supply current of 650μA allows for maximum current regulator's design flexibility.
TPS2592ALDRCT Features
Cut Tape (CT) package
TPS2592 family
The maximal supply voltage of 13.8V
TPS2592ALDRCT Applications
There are a lot of Texas Instruments TPS2592ALDRCT Current Regulation/Managements applications.
- Over-current protection
- Over-current measurement
- Current sensing
- Diesel injection controls
- Over current monitor
- Programmable current source
- Vehicle dynamic controls
- Smart battery packs
- Level translating
- Motor controls
