TPS27082LDDCR
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Weight | 36.003894mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 260mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1.19W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS27082 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 3A |
| Supply Voltage-Max (Vsup) | 8V |
| Supply Voltage-Min (Vsup) | 1V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 1.19W |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Nominal Input Voltage | 8V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.2V~8V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 32m Ω |
| Built-in Protections | TRANSIENT |
| Ambient Temperature Range High | 85°C |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS27082LDDCR Description
The TPS27082LDDCR IC is a high-side load switch that integrates a Power PFET and a control circuit in a tiny TSOT-23 package. TPS27082LDDCR requires very low ON-state quiescent current and offers very low OFF-state leakage thus optimizing system power efficiency.
TPS27082LDDCR Features
Low ON-Resistance, High Current PFET
Configurable Turn-ON and Turn-OFF Slew Rate
-10-μs Default Minimum Output Rise Time at VIN=5 V
Configurable Turnon and Turnoff Slew Rate
Supports a Wide Range of VIN 1.2VUp to 8 V
Excellent OFF isolation Even Under Fast Input Transients
1.0V up to 8V NMOS Control Logic Interface With Configurable Hysteresis
Fully Protected Against ESD (All Pins)
-HBM2000V, CDM500V
Very Low ON-state Quiescent Current (Down to 1.2 μA)
Very Low OFF-state Leakage Current (Typical 100 nA)
Available in 2.9 mm x 1.6 mm x 0.75mm SOT-23 (DDC) Package
TPS27082LDDCR Applications
High-Side Load Switches
Inrush-current Controls
Power Sequencing and Controls
Stand-by Power isolation
Portable Power Switches
