TPS27S100APWPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS27S100 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 40V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | Logic |
| Current - Output (Max) | 13A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 40V |
| Fault Protection | Over Load, Over Temperature, Short Circuit, UVLO |
| Turn On Time | 50 µs |
| Output Peak Current Limit-Nom | 7A |
| Rds On (Typ) | 80m Ω |
| Turn Off Time | 80 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
TPS27S100APWPT Overview
It is packaged in the form of a Tape & Reel (TR).The 14-PowerTSSOP (0.173, 4.40mm Width) package contains it.This lighting drivere has a mounting type of Surface Mount.The switch type is Relay, Solenoid Driver.Keeping the temperature at -40°C~125°C TA ensures reliable operation.By default, it is set to output 1.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Currently, the LED driving board is equipped with Shutdown features.It is a member of the TPS27S100 family.In total, there are 14 terminations.14 pins are used for operation.There are 1 functions of the LED driver.In terms of output, the lighting driver can provide a maximum of 13A V.Using a voltage of 24V allows for high efficiency.This electrical component is part of the Automotive, AEC-Q100 series.This LED driver is configured to have a maximum supply voltage of 40V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 5V.
TPS27S100APWPT Features
Supplied from 24V
TPS27S100APWPT Applications
There are a lot of Texas Instruments TPS27S100APWPT Power Switches ICs applications.
- Hot Swaps
- Hot Swap
- HDD and SSD
- Storage Drives
- Set-top-box
- Low Voltage I/O System Power
- PC Cards
- Smart Phones, Feature Phones
- Hard Disk Drives
- Wearable Devices
