TPS27S100BPWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS27S100 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 40V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | Logic |
| Current - Output (Max) | 13A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 40V |
| Fault Protection | Over Load, Over Temperature, Short Circuit, UVLO |
| Turn On Time | 50 µs |
| Output Peak Current Limit-Nom | 7A |
| Rds On (Typ) | 80m Ω |
| Turn Off Time | 80 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
DRV8871DDAR Description
The brushed-DC motor driver DRV8871DDAR is designed for printers, appliances, industrial equipment, and other small machines. The H-bridge driver, which is made up of four N-channel MOSFETs that can control motors bidirectionally with up to 3.6 A peak current, is controlled by two logic inputs. To control motor speed, the inputs can be pulse-width modulated (PWM) utilizing a variety of current-decay techniques. Both inputs are set to low to enter a low-power sleep state.
DRV8871DDAR Features
H-Bridge Motor Driver
Drives One DC Motor, One Winding of a Stepper Motor, or Other Loads
Wide 6.5-V to 45-V Operating Voltage
565-mΩ Typical RDS(on) (HS + LS)
3.6-A Peak Current Drive
PWM Control Interface
Current Regulation Without a Sense Resistor
Low-Power Sleep Mode
Small Package and Footprint
8-Pin HSOP With PowerPAD?
4.9 × 6 mm
Integrated Protection Features
VM Undervoltage Lockout (UVLO)
Overcurrent Protection (OCP)
Thermal Shutdown (TSD)
Automatic Fault Recovery
Description of the DRV
DRV8871DDAR Applications
Printers
Appliances
Industrial Equipment
Other Mechatronic Applications
