TPS27S100BPWPT
| Parameters | |
|---|---|
| Supply Voltage-Max (Vsup) | 40V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | Logic |
| Current - Output (Max) | 13A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 40V |
| Fault Protection | Over Load, Over Temperature, Short Circuit, UVLO |
| Turn On Time | 50 µs |
| Output Peak Current Limit-Nom | 7A |
| Rds On (Typ) | 80m Ω |
| Turn Off Time | 80 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS27S100 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
TPS27S100BPWPT Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It's included in the 14-PowerTSSOP (0.173, 4.40mm Width) package.The lighting driver is mounted in the Surface Mount position.A Relay, Solenoid Driver switch type is owned by it.To ensure reliable operation, set the temperature to -40°C~125°C TA.There are 1 outputs available on this lighting driver.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be obtained with this LED driver.In terms of features, the LED driving board has Shutdown.It belongs to the TPS27S100 family.A total of 14 terminations can be found in it.In order to operate, the 14 pins are used.It contains 1 functions.This LED driver has a maximum output of 13AV.A supply voltage of 24V leads to high efficiency.This electrical component can be found in the Automotive, AEC-Q100 series.The maximum supply voltage for this lighting driver is set to 40V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 5V.
TPS27S100BPWPT Features
Supplied from 24V
TPS27S100BPWPT Applications
There are a lot of Texas Instruments TPS27S100BPWPT Power Switches ICs applications.
- Telecom and Network Systems
- Wireless Modem Data Cards
- Smart Phones, Feature Phones
- Portable GPS Device
- Portable Music Players
- Storage (HDDs, SSDs)
- PDAs
- Solid-State Drives
- Low Voltage I/O System Power
- Hot-Swap Systems
