TPS2811D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | BIMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Base Part Number | TPS2811 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Power Supplies | 10V |
| Nominal Supply Current | 5mA |
| Power Dissipation | 730mW |
| Output Current | 2A |
| Max Supply Current | 200nA |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | INVERTED |
| Input Characteristics | SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2811D Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.Gate drivers is package in Tube case.In this case, gate drivers is mounted along the way of Surface Mount.In the absence of a 4V~14V supply voltage, its superiority can be demonstrated.A gate type of N-Channel, P-Channel MOSFET is used in its design.-40°C~125°C TA is the allowed temperature range for this device.The input type is Inverting.There are 8 terminations to form the base of its configuration.Many related parts can be found under its base part number TPS2811.The device is mounted using Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.The device is specifically designed to operate at 10V volts.Its interface IC is NAND GATE BASED MOSFET DRIVER.There is an output current limit of 2A for this device.This subcategory of MOSFET Drivers has a number of useful electronic components.There are 8 component pins on the board.Based on its basis, it integrates 2 outputs.The device is capable of delivering a current of 2A.Considering its maximum power dissipation, 730mW shows its maximum capacity to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 200nA to ensure greater stabilMosfet gate driversy.With its 10V power supply, it provides power for diverse applications.Mosfet gate drivers receives an input of SCHMITT TRIGGER.
TPS2811D Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TPS2811D Applications
There are a lot of Texas Instruments TPS2811D gate drivers applications.
- High-voltage isolated DC-DC converters
- DC/DC converters
- Welding
- Head-up and Head mounted displays
- Broadcast equipment
- General Purpose 3-Phase Inverter
- serial peripheral interface (SPI), I2C
- Motor controllers
- Multicolor LED/laser displays
- Topologies
