TPS2811DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | BIMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Base Part Number | TPS2811 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 2mA |
| Power Supplies | 10V |
| Nominal Supply Current | 200nA |
| Power Dissipation | 730mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | INVERTED |
| Input Characteristics | SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2811DR Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tape & Reel (TR) is the packaging method.In this case, gate drivers is mounted along the way of Surface Mount.In the absence of a power supply voltage of 4V~14V V, it is able to demonstrate its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.For this device, the temperature range is -40°C~125°C TA.This program uses the input type of Inverting.There are 8 terminations to form the base of its configuration.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TPS2811.Surface Mount is the way it takes to mount the device.At the time of design, it is configured with 8 pins.With a supply voltage of 10V, it is designed to operate.Its interface IC is NAND GATE BASED MOSFET DRIVER.An output current as high as 2mA can be achieved at maximum power.Within this subcategory of MOSFET Drivers, there are several useful electronic components.There are 8 component pins on the board.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.This device is capable of delivering 2A current.730mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.With its 10V power supply, it provides power for diverse applications.The input is characterized by SCHMITT TRIGGER.
TPS2811DR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TPS2811DR Applications
There are a lot of Texas Instruments TPS2811DR gate drivers applications.
- Isolated Gate Driver Supplies
- Power factor correction (PFC) circuits
- Industrial Modules
- A/D drivers
- Solar power supplies
- DC/DC converters
- High current laser/LED systems
- Commercial air-conditioning (CAC)
- UPS systems
- Motor Control
