TPS2811P
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.09W |
| Technology | BIMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Base Part Number | TPS2811 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 13V |
| Max Output Current | 2A |
| Power Supplies | 10V |
| Nominal Supply Current | 5mA |
| Power Dissipation | 1.09W |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | INVERTED |
| Input Characteristics | SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Turn Off Time | 0.05 µs |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
TPS2811P Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.Gate drivers is package in Tube case.Its recommended mounting way is Through Hole.When the supply voltage is 4V~14V it is able to demonstrate its superiority.N-Channel, P-Channel MOSFET is the gate type used for this design.This device is allowed to operate in a temperature range of -40°C~125°C TA.Inverting is used as its input type.It's configured with 8 terminations.Numerous related parts are available for its base part number TPS2811.The mount method is Through Hole.In the device, there are 8 pins.A voltage of 10V is required for its operation.The interface IC is referred to as NAND GATE BASED MOSFET DRIVER.The maximum output current can amount to 2A.There are various useful electronic components in its subcategory MOSFET Drivers.The component has 8 pins.Mosfet driver is based on a basis of 2 outputs that have been integrated.The output current of this device can be set to 2A.The maximum power dissipation of 1.09W shows its maximum capability to transfer and conduct power loss without overheating.With its power supplies of 10V, it solves the power supply problems for diverse applications.Mosfet gate drivers produces a voltage of 13V.SCHMITT TRIGGER is its input.
TPS2811P Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.09W
TPS2811P Applications
There are a lot of Texas Instruments TPS2811P gate drivers applications.
- Telecom switch mode power supplies
- Solar power supplies
- A/D drivers
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Motor Drives
- Motor Controls
- Automotive Applications
- Industrial Power Supplies
- Power factor correction (PFC) circuits
- Multicolor LED/laser displays
