TPS2811PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 520mW |
| Technology | BIMOS |
| Voltage - Supply | 4V~14V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2811 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 15.5V |
| Max Output Current | 2A |
| Power Supplies | 10V |
| Element Configuration | Dual |
| Nominal Supply Current | 200nA |
| Power Dissipation | 520mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | INVERTED |
| Input Characteristics | GATED SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Turn Off Time | 0.05 µs |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2811PW Overview
Its 8-TSSOP (0.173, 4.40mm Width) package is adopted for higher flexibility.A packaging method of Tube is used.Gate drivers is mounted in the way of Surface Mount.In the absence of a 4V~14V supply voltage, it can demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.This device can operate at temperatures up to -40°C~125°C TA.Mosfet driver uses Inverting as Mosfet drivers input type.Its configuration starts with 8 terminations.You will find various related parts under the base part number TPS2811.Surface Mount is the way it takes to mount the device.In the device, there are 8 pins.In addition, it is specifically designed to operate with a supply voltage of 10V.NAND GATE BASED MOSFET DRIVER is employed as its interface IC.There is a maximum output current of 2A.There are several useful electronic components found in its subcategory of MOSFET Drivers.A board with 8 component pins is available.There are 2 outputs integrated for its basis.Mosfet gate drivers supports a current output of 2A.Using 520mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.The power supply of 10V is able to solve the power supply problems for a wide variety of applications.As a result, a voltage of 15.5V is produced.There is a GATED SCHMITT TRIGGER value associated with its input.
TPS2811PW Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 520mW
TPS2811PW Applications
There are a lot of Texas Instruments TPS2811PW gate drivers applications.
- Automotive Applications
- Multicolor LED/laser displays
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Motor Control
- 3-Phase Motor Inverter Driver
- Refrigerator
- DC-DC Converters
- Broadcast equipment
- Digitally controlled power supplies
