TPS2811PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 520mW |
| Technology | BIMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2811 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Power Supplies | 10V |
| Nominal Supply Current | 200nA |
| Power Dissipation | 520mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | INVERTED |
| Input Characteristics | GATED SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Turn Off Time | 0.05 µs |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2811PWR Overview
Gate drivers provides greater flexibilGate driversy to use the 8-TSSOP (0.173, 4.40mm Width) package.Tape & Reel (TR) is the packaging method.Gate drivers is mounted in the way of Surface Mount.WGate driversh a 4V~14V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.This device is designed with a N-Channel, P-Channel MOSFET gate type.This device can operate at temperatures up to -40°C~125°C TA.The input type is Inverting.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.There are various parts that can be found under its base part number TPS2811.Mosfet driver is mounted using the Surface Mount method.During design, it is configured with 8 pins.A supply voltage of 10V is required for operation.Its interface IC is NAND GATE BASED MOSFET DRIVER.There is a maximum output current of 2A that can be achieved.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board has a total of 8 component pins.The basis of this system consists of 2 outputs.The output current can be set to 2A.Its maximum power dissipation of 520mW also demonstrates its maximum ability to transfer power without overheating.Due to its power supply of 10V, it provides an effective solution to power supply problems for a wide range of applications.GATED SCHMITT TRIGGER is its input.
TPS2811PWR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 520mW
TPS2811PWR Applications
There are a lot of Texas Instruments TPS2811PWR gate drivers applications.
- DC-DC Converters
- Video amplifiers
- Topologies
- DC/DC converters
- High-voltage isolated DC-DC converters
- Motor Controls
- Active filtering
- Multicolor LED/laser displays
- Pulse transformer drivers
- Industrial Modules
