TPS2811QPWRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2811 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Power Supplies | 10V |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Supply Current-Max | 0.005mA |
| Input Type | Inverting |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 14ns |
| Fall Time (Typ) | 15 ns |
| Output Polarity | INVERTED |
| Input Characteristics | GATED SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | AND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Turn Off Time | 0.05 µs |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2811QPWRQ1 Overview
In order to increase flexibility, the package 8-TSSOP (0.173, 4.40mm Width) is used.Tape & Reel (TR) represents the packaging method.Surface Mount is mounted in the way of the device.When the supply voltage is set to 4V~14V, it can demonstrate its superiority.This gate type has a N-Channel, P-Channel MOSFET design.This device allows temperatures in the range of -40°C~125°C TA.This program uses the input type of Inverting.Its configuration starts with 8 terminations.Numerous related parts can be found under its base part number TPS2811.Mosfet driver is mounted using the Surface Mount method.Devices have 8 pins available.The device is specifically designed to operate at 10V volts.The interface chip of the system is AND GATE BASED MOSFET DRIVER.Within this subcategory of MOSFET Drivers, there are several useful electronic components.The board contains 8 pins for component connections.For its basis, 2 outputs are integrated.The output current can be set to 2A.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 10V.A gate driver in the Automotive, AEC-Q100 series is included in this document.GATED SCHMITT TRIGGER is its input.When operating, the supply current cannot exceed 0.005mA.
TPS2811QPWRQ1 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Operating with the supply voltage of Automotive, AEC-Q100
TPS2811QPWRQ1 Applications
There are a lot of Texas Instruments TPS2811QPWRQ1 gate drivers applications.
- Broadcast equipment
- Automotive Applications
- PCMCIA applications
- Pulse transformer drivers
- DC/DC converters
- Isolated Gate Driver Supplies
- High frequency line drivers
- Solar inverters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Multicolor LED/laser displays
