TPS2812DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | BIMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Base Part Number | TPS2812 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Power Supplies | 10V |
| Nominal Supply Current | 200nA |
| Power Dissipation | 730mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | TRUE |
| Input Characteristics | SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2812DRG4 Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tape & Reel (TR) is indicated.Its recommended mounting way is Surface Mount.When the supply voltage is 4V~14V it is able to demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET is used in its design.This device can operate at temperatures up to -40°C~125°C TA.This program uses the input type of Non-Inverting.Its configuration starts with 8 terminations.Under its base part number TPS2812, various related parts can be found.You mount it with Surface Mount.At the time of design, it is configured with 8 pins.A voltage of 10V is required for its operation.Mosfet driver is equipped wMosfet driverh an interface chip NAND GATE BASED MOSFET DRIVER.There is a maximum output current of 2A that can be achieved.Within this subcategory of MOSFET Drivers, there are several useful electronic components.The board has a total of 8 component pins.The basis of this system consists of 2 outputs.This device supports a current output of 2A at the output.Using 730mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.Due to its power supply of 10V, it provides an effective solution to power supply problems for a wide range of applications.Its input is characterized by SCHMITT TRIGGER.
TPS2812DRG4 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TPS2812DRG4 Applications
There are a lot of Texas Instruments TPS2812DRG4 gate drivers applications.
- Industrial Power Supplies
- DC/DC converters
- Digitally controlled power supplies
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- LCD/LCoS/DLP portable and embedded pico projectors
- Topologies
- Portable Media Players
- Commercial air-conditioning (CAC)
- Refrigerator
- Motor controllers
