TPS2813DR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | BIMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Base Part Number | TPS2813 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 11.5V |
| Max Output Current | 2A |
| Power Supplies | 10V |
| Nominal Supply Current | 5mA |
| Power Dissipation | 730mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | SCHMITT TRIGGER |
| Rise Time | 14ns |
| Fall Time (Typ) | 15 ns |
| Output Polarity | TOTEM-POLE |
| Input Characteristics | GATED SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2813DR Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Gate drivers is package in Cut Tape (CT) case.It's mounted on the way to Surface Mount.In the absence of a power supply voltage of 4V~14V V, it is able to demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~125°C TA.Input type of Inverting, Non-Inverting is used.Its configuration is based on a total of 8 terminations.Many related parts can be found under its base part number TPS2813.In this case, Surface Mount indicates how the device is mounted.The pins are configured with 8 when designing the chip.Mosfet driver is designed specifically to run on 10V volts of power.The interface IC of the device is NAND GATE BASED MOSFET DRIVER.An output current as high as 2A can be achieved at maximum power.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board contains 8 pins for component connections.There are 2 outputs integrated for its basis.Mosfet gate drivers can deliver a current of 2A.Its maximum power dissipation of 730mW also demonstrates its maximum ability to transfer power without overheating.With its 10V power supply, it provides power for diverse applications.In this case, the voltage is 11.5V.Its input is characterized by the value GATED SCHMITT TRIGGER.
TPS2813DR Features
Embedded in the Cut Tape (CT) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TPS2813DR Applications
There are a lot of Texas Instruments TPS2813DR gate drivers applications.
- High-voltage isolated DC-DC converters
- Motor Control
- Smart Phones
- Portable computers
- Video amplifiers
- High power buffers
- LCD/LCoS/DLP portable and embedded pico projectors
- UPS systems
- High-speed communications
- White Goods - Air Conditioner, Washing Machine,
