TPS2813P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.09W |
| Technology | BIMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Base Part Number | TPS2813 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 11.5V |
| Max Output Current | 2A |
| Power Supplies | 10V |
| Nominal Supply Current | 5mA |
| Power Dissipation | 1.09W |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | SCHMITT TRIGGER |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | TOTEM-POLE |
| Input Characteristics | GATED SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Turn Off Time | 0.05 µs |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2813P Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.A package of Tube has been used.In this case, gate drivers is mounted along the way of Through Hole.In the absence of a power supply voltage of 4V~14V V, it is able to demonstrate its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.In this device, temperatures must not exceed -40°C~125°C TA.Mosfet driver accepts input of type Inverting, Non-Inverting.There are 8 terminations to form the base of its configuration.The base part number TPS2813 refers to a number of related parts.Mosfet driver is mounted using Through Hole.In the device, there are 8 pins.With a supply voltage of 10V, it is designed to operate.The interface chip of the system is NAND GATE BASED MOSFET DRIVER.The maximum output current can amount to 2A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.The component has 8 pins.For its basis, there are 2 outputs integrated.Mosfet gate drivers supports a current output of 2A.According to its maximum power dissipation, 1.09W is capable of conducting and transferring a large amount of power without overheating.Due to its power supplies of 10V, it solves the power supply problem for a wide range of applications.In this case, it outputs 11.5V voltage.Its input is characterized by the value GATED SCHMITT TRIGGER.
TPS2813P Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.09W
TPS2813P Applications
There are a lot of Texas Instruments TPS2813P gate drivers applications.
- DC/DC converters
- Motor Control
- Broadcast equipment
- Industrial Modules
- Telecom switch mode power supplies
- Solar inverters
- DC-DC Converters
- Multicolor LED/laser displays
- Isolated Supplies for controller area network (CAN),
- Solar power supplies
